BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 249

Section 08 ELECTRICAL SYSTEM
Subsection 04 (STARTING SYSTEM)
14,15, Screw and Teeth Washer
Apply Loctite 271 (red) to screw.
Connect BLACK negative cable to starter using
flat washer, teeth washer and screw. Torque screw
to 22 N•m (16 lbf•ft). Apply dielectric grease on
terminal and screw.
2
3
4
F01H1JC
717 ENGINE SHOWN
1
Step : Torque nut to 6 N•m (53 lbf•in)
2
Step : Apply Loctite 271 on screw
3
Step : Torque screw to 22 N•m (16 lbf•ft)
4
Step : Apply dielectric grease
WARNING
Always connect RED positive cable first then
BLACK negative cable last. Whenever con-
necting the RED positive cable to the starter
motor make sure the battery cables are dis-
connected to prevent electric shock.
08-04-12
1 4
787 Engine
18, Locking Collar
Install the locking collar of the fuel hose. Apply
Loctite 242 (blue) on nut no. 19 and torque to
25 N•m (18 lbf•ft).
2
F07H03A
787 ENGINE
1. Locking collar
2. Nut
947 Engine
10, Screw
Apply Loctite 242 (blue) to Allen screws of starter
bracket and torque to 10 N•m (89 lbf•in).
17, Nut
Connect the RED positive cable to the starter and
torque nut to 6 N•m (53 lbf•in). Apply dielectric
grease on terminal and nut.
1