BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 113

947 Engine
To remove end bearings from crankshaft, use the
following tools.
6 1
2
6
F06B03A
947 ENGINE
1. Puller (P/N 420 877 635)
2. Protective cap (P/N 290 877 414)
3. Distance ring (P/N 290 876 569)
4. Ring (P/N 290 977 480)
5. Ring halves (P/N 290 876 330)
6. Screw (P/N 290 940 755)
NOTE: To facilitate ring or distance ring installa-
tion, lubricate their inside diameters.
All Engines
F01D1OA
TYPICAL
1. Removing crankshaft bearing
Or, use a bearing extractor such as Proto no. 4332
and a press to remove two bearings at a time (ex-
cept on PTO side for the 787 engine).
3 4 5
1
Subsection 06 (BOTTOM END)
1
F01D1PA
1. Press bearings out
2. Bearing extractor
18, Crankshaft Gear
787 Engine
The crankshaft gear and bearing no. 5 can be re-
moved in one step using the following puller.
1
F04B03A
1. Puller (P/N 290 877 665)
Install the puller as per following illustration.
Section 04 ENGINE
2
04-06-9