BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 133

F01D2DA
1. Shield side (toward gear)
Push bearing until it stops on its seat.
1
F01D33A
1. Bearing
2. Pusher
11, Seal
Apply lithium grease on seal lips. Position seal
with shielded portion against shaft splines.
8, Bearing
Install ball bearing as illustrated.
1
2
Subsection 07 (ROTARY VALVE)
1
2
A13C0FB
1. Seal
2. Ball bearing
3. Bearing extractor Snap-on CJ-950
Install shim no. 15, snap ring no. 7 and slide dis-
tance sleeve no. 14 on shaft.
2
1
5
F01D2FA
1. Seal
2. Ball bearing
3. Snap ring
4. Distance sleeve
5. Shim 0.5 mm (.020 in)
6. Rotary valve shaft
3, Rotary Valve Shaft Assembly
-
CAUTION
Crankcase halves must be separated and
crankshaft must not be present to install ro-
tary valve shaft assembly in crankcase.
Section 04 ENGINE
3
4
6
04-07-7
3