F01D0ZA
1. Ring end gap aligned with piston locating pin
Slide cylinder over piston.
F01D10A
When reassembling cylinders to crankcase, it is
important to have them properly aligned so that
exhaust flanges properly match up with exhaust
manifold.
1
Subsection 05 (TOP END)
717 Engine
The aligning tool (P/N 290 876 902) or the exhaust
manifold can be used to align cylinders.
F01D44A
717 ENGINE
1. Exhaust flange aligning tool
F01D45A
717 ENGINE
1. Aligning cylinders using exhaust manifold
Section 04 ENGINE
1
1
04-05-25