BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 158

Section 05 COOLING SYSTEM
Subsection 02 (CIRCUIT, COMPONENTS AND CARE)
F06E09A
1. Water supply of the water flow regulator valve
The lower hose of the valve is the water supply
and the upper hose is the regulated injection wa-
ter for the tuned pipe.
2
1
3
F06E0CA
1. Water supply from tuned pipe water jacket
2. Regulated injection water to the tuned pipe
3. Muffler
05-02-8
1
Regulated water is injected in the tuned pipe by a
calibrated fitting.
F06E0AA
1. Injection fitting
All Models
-
CAUTION
Never modify cooling system arrangement,
otherwise serious engine damage could occur.
TECHNICAL DATA
TYPE:
TLCS (Total Loss Cooling System).
COOLANT FLOW:
Pressure build-up at impeller housing
(no water pump).
TEMPERATURE CONTROL:
Calibrated outlet fittings (no thermostat).
SYSTEM BLEEDING:
Self-bleed type (hose at uppermost point of circuit).
SYSTEM DRAINING:
Self-drain type (hose at lowest point of circuit).
SYSTEM FLUSHING:
Fitting spigot or hose adapter.
MONITORING BEEPER:
Turns on at 86-94°C (187-201°F).
1