BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 118

Section 04 ENGINE
Subsection 06 (BOTTOM END)
Connecting Rod Big End Axial Play
NEW PARTS
MEASUREMENT
(min.)
Connecting rod 0.390 mm
big end axial play (.015 in)
Using a feeler gauge, measure distance between
thrust washer and crankshaft counterweight.
1
2
F01D1WA
1. Measuring big end axial play
2. Feeler gauge
23, Bearing
947 Engine
Check bearing no. 23 of starter drive assembly
no. 27 in crankcase.
F06D1IA
1. Bearing of starter drive assembly
04-06-14
WEAR
LIMIT
(max.)
0.737 mm 1.2 mm
(.029 in) (.047 in)
1
28, Reed Valve
947 Engine
Check reed valve petals no. 29 for cracks or other
defects. The reed petals must lie completely flat
against the reed valve body no. 30. To check, hold
against light.
F06D1JA
1. No play
In case of a play, turn reed petals upside down
and recheck. If there is still a play, replace petals.
Check perfect condition of rubber coating on reed
valve body.
Check stopper distance from center of reed valve
block.
A
F06D1EA
A. 13 ± 0.25 mm (.512 ±.010 in)
1