BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 56

Section 04 ENGINE
Subsection 03 (REMOVAL AND INSTALLATION)
F07D08A
947 ENGINE
1. Unplug connector
Cooling System
Disconnect the engine water supply hose.
Disconnect the engine water return hose.
Tuned Pipe
To remove tuned pipe, refer to EXHAUST SYS-
TEM 04-08.
Air Intake Silencer
To remove air intake silencer, refer to AIR INTAKE
06-03.
Carburetor
All Models Except the XP Limited
To remove carburetor(s), refer to CARBURETOR
06-04.
XP Limited
Disconnect choke and throttle cables from carbu-
retor linkage.
Disconnect fuel supply and fuel return hoses.
Engine Support
NOTE: Be careful when removing engine sup-
port(s) or rubber mount adapters, shims could
have been installed underneath. Shims control en-
gine/jet pump alignment. Always note position of
shims for reinstallation, to avoid altering engine
alignment.
Remove engine support mount screws.
04-03-2
1
F02D08A
717 ENGINE
1. Remove screw of each engine support
F06D35A
787 AND 947 ENGINES — FRONT SUPPORT
1. Remove screw
F06D36A
787 AND 947 ENGINES — REAR SUPPORT
1. Remove screws
1
1
1