BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 247

Section 08 ELECTRICAL SYSTEM
Subsection 04 (STARTING SYSTEM)
Slide stop collar no. 7 over circlip no. 6 and se-
cure in place by punching it at 2 or 3 places.
1
2
A03E0EA
1. Armature shaft
2. Circlip
3. Pinion stop collar
4. Punch
1,10, Yoke Assembly and Clutch
Housing
Align previously traced indexing marks.
F01H0QA
TYPICAL
1. Align marks
08-04-10
4
3
1
Open brushes no. 4 and slide over commutator.
Align end frame locating notch with yoke locating
protrusion and properly sit brush holder no. 2 into
yoke no. 1.
F01H0SA
1. Locating protrusion is the higher one
F01H0TA
1. Brush holder locating notch
To ease end frame installation, retain brush holder
with a small screwdriver while installing end
frame.
1
1