BOMBARDIER SEA-DOO SPX 5838 1998 Shop Manual page 75

Section 04 ENGINE
Subsection 04 (MAGNETO SYSTEM)
4,5, Rotor and Flywheel
Apply Loctite 648 (green) on mating surface of the
rotor no. 4.
When reinstalling rotor to flywheel, one of the
protrusion end of rotor must be aligned with hole
in flywheel.
1
F06D0OA
1. Protrusion
2. Hole
Apply Loctite 648 (green) on screws no. 7 retain-
ing rotor to flywheel and torque screws in a criss-
cross sequence to 13 N•m (115 lbf•in).
Apply Loctite 242 (blue) on crankshaft taper.
1
F06D24A
1. Loctite 242 (blue) on crankshaft taper
04-04-14
2
Install flywheel and make sure to align keyway
with the crankshaft Woodruff key.
Apply Loctite 242 (blue) on nut no. 6. Install nut
with lock washer and torque to 115 N•m (85 lbf•ft).
-
CAUTION
Never use any type of impact wrench.
Unlock crankshaft. Reinstall pulse fitting with
washer and torque to 19 N•m (14 lbf•ft).
1, Cover
Before installation, properly install O-ring no. 3 in
engine magneto cover.
Apply Loctite 767 anti-seize compound on screws
no. 2. Torque screws in a criss-cross sequence to
9 N•m (80 lbf•in).