Select A Direct-To Destination To A Flight Plan; Waypoint; Select A Direct-To Destination To A Nearest Airport; Select A Direct-To Destination To A Recently - Garmin G1000 Reference Manual

SECTION 7 – NAVIGATION
9) Press the ENT Key. The cursor is placed in the
'VNAV' offset distance field.
10) Enter the desired target altitude offset from the
selected Direct-to.
11) Press the ENT Key to highlight 'Activate?' or turn
the large FMS Knob to highlight the 'COURSE'
field.
12) Enter the desired course to the waypoint.
13) Press the ENT Key to highlight 'ACTIVATE?'.
14) Press the ENT again to activate the Direct-to.

Select a Direct-to Destination to a Flight Plan

Waypoint

1) While navigating an active flight plan, press the
Direct-to (
2) Turn the small FMS Knob to the left to display a
list of flight plan waypoints as shown in Figure
7-3.
Figure 7-3 Flight Plan Waypoint List (MFD)
3) Turn the large FMS Knob to select the desired
waypoint.
4) Press the ENT Key. The cursor is now displayed
on 'ACTIVATE?'.
5) Press ENT again to activate a Direct-to.
7-2
) Key.
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
Select a Direct-to Destination to a Nearest
Airport
1) Press the Direct-to (
2) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed as in Figure
7-3. The list is populated only when navigating
a flight plan.
Figure 7-4 Nearest Airport List (MFD)
3) Turn the small FMS Knob to the right to display
the 'NRST' airports to the aircraft's current
position as shown in Figure 7-4.
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key. The cursor is now displayed
on 'ACTIVATE?'.
6) Press ENT again to activate a Direct-to.

Select a Direct-to Destination to a Recently

Entered Identifier
1) Press the Direct-to (
2) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed as in Figure
7-3. The list is populated only when navigating
a flight plan.
) Key.
) Key.