Wristband Adapter; Attach Adapters To Watch; Attach Wristband To Adapter; Compatible Sensors - Polar Electro Pacer Pro User Manual

Table of Contents

WRISTBAND ADAPTER

When using the wristband adapter Polar Pacer Pro is compatible with all standard 20 mm wristbands that have a spring

bar.

1. Put the adapter into place, and then insert the pin into the pin hole on the adapter, and push it firmly into place. Make

sure the knob on the pin is the right way around.

2. Make sure the pin is pushed all the way and you're all set.

1. Insert the pin (the opposite side of the quick-release knob) into the pin hole on the adapter.

2. Pull the quick-release knob inwards and align the other end of the pin with the hole on the adapter.

3. Release the knob to lock the band in place.

Enhance your training experience, and achieve a more complete understanding of your performance with compatible

Bluetooth® sensors. In addition to a number of Polar sensors your watch is fully compatible with several third-party

sensors.

View a full list of compatible Polar sensors and accessories

View compatible third-party cycling sensors

Before taking a new sensor into use, it has to be paired with your watch. Pairing only takes a few seconds, and ensures that

your watch receives signals from your sensors only, and allows disturbance-free training in a group. Before entering an

event or race, make sure that you do the pairing at home to prevent interference due to data transmission. For instructions,

see

Pairing sensors with your

Monitor your heart rate with maximum precision with the Polar H10 heart rate sensor with a chest strap.

running sensor

watch.

117

Table of Contents