Table of Contents
Advertisement
IMPORTANT INFORMATION
BATTERY
At the end of the working life of the product Polar encourages you to minimize possible effects of waste on the
environment and human health by following local waste disposal regulations and, where possible, utilizing separate
collection of electronic devices. Do not dispose of this product as unsorted municipal waste.
CHARGING THE BATTERY
Before charging, please make sure there's no moisture, dust or dirt on the charging contacts of your watch and
cable. Gently wipe off any dirt or moisture. Do not charge the watch when it's wet.
Your watch has an internal, rechargeable battery. Rechargeable batteries have a limited number of charge cycles. You can
charge and discharge the battery over 500 times before a notable decrease in its capacity. The number of charge cycles
also varies according to use and operating conditions.
Do not charge the battery in temperatures under 0 °C/ +32 °F or over +40 °C/ +104 °F or when the USB port is
wet.
Use the USB cable included in the product set to charge it via the USB port on your computer.
You can charge the battery via a wall outlet. When charging via a wall outlet, use a USB power adapter (not included in the
product set). If you use a USB power adapter, make sure that the adapter is marked with "output 5Vdc" and that it provides
a minimum of 500mA. Only use an adequately safety approved USB power adapter (marked with "LPS", "Limited Power
Supply", "UL listed" or "CE").
To charge with your computer, just plug your watch to your computer, and at the same time, you can have it synced it with
FlowSync.
1. To charge your watch, plug it into a powered USB port or a USB charger with the custom cable that came in the box.
The cable magnetically snaps into place.
134
Advertisement
Table of Contents
