Removing The Wristband; To Remove The Wristband; To Attach The Wristband; Disposal Information - Polar Electro m600 User Manual

Hide thumbs Also See for m600:

Table of Contents

authorized by Polar Electro. For further information, see

For contact information and all Polar Service Center addresses, visit

sites.

REMOVING THE WRISTBAND

Removing and replacing the wristband of your M600 is very simple. We recommend that you separate the wrist-

band from the device after each training session and rinse them under running water in order to keep the M600

clean.

1. Bend the wristband from both sides, one side at a time, to detach it from the device. It's easiest to

remove the side closest to the charging port first.

2. Pull the device from the wristband.

1. Set one end of the device in its place.

2. Gently pull from the opposite side of the wristband to get it over the other end of the device.

3. Make sure the band fits flush with the device, both front and back.

At the end of the working life of the product, Polar encourages you to minimize possible effects of waste on the

environment and human health by following local waste disposal regulations and, where possible, utilizing sep-

arate collection of electronic devices. Do not dispose of this product as unsorted municipal waste.

The Polar M600 is designed to measure heart rate and tell your activity. No other use is intended or implied.

The training device should not be used for obtaining environmental measurements that require professional or

industrial precision.

Limited International Polar

support.polar.com

Guarantee.

and country-specific web-

Table of Contents