Mitsubishi Electric MELSERVO-J3 Series Instruction Manual page 742

17. SPEED CONTROL OPERATION
No. Symbol
PD13
PD14
PD15
PD16
PD17
PD18
PD19 *DIF
PD20 *DOP1 Function selection D-1
PD21
PD22
PD23
Name and function
For manufacturer setting
Do not change this value by any means.
Not used in speed control operation.
Do not change the parameter.
For manufacturer setting
Do not change this value by any means.
Not used in speed control operation.
Do not change the parameter.
For manufacturer setting
Do not change this value by any means.
Input filter setting
Select the input filter.
0 0 0
Input filter
If external input signal causes chattering due
to noise, etc., input filter is used to suppress it.
0: None
1: 0.888[ms]
2: 1.777[ms]
3: 2.660[ms]
4: 3.555[ms]
5: 4.444[ms]
Select the stop processing at the time when the forward rotation stroke end
(LSP)/reverse rotation stroke end (LSN) is off, and select the base circuit
status at the time when the reset (RY(N+1)A or RY(n+3)A) is on.
0 0
Stopping method for Forward rotation stroke end
(LSP) off or Reverse rotation stroke end (LSN) off
0: Sudden stop
1: Slow stop
Selection of base circuit status at reset (RY(n+1)A or
RY(n+3)A) on
0: Base circuit shut off
1: Base circuit not shut off
For manufacturer setting
Do not change this value by any means.
Not used in speed control operation.
Do not change the parameter.
For manufacturer setting
Do not change this value by any means.
17 - 57
Initial Setting
Unit
value Range
0000h
0800h
0000h
0000h
0000h
0000h
0002h Refer to
the
Name
and
function
column.
0010h Refer to
the
Name
and
function
column.
0000h
0000h
0000h