Mitsubishi Electric MELSERVO-J3 Series Instruction Manual page 37

1. FUNCTIONS AND CONFIGURATION
(2) MR-J3-200TN MR-J3-200T4 or less
5
Cooling fan
Fixed part
(3 places)
Note. Connectors (CNP1, CNP2, and CNP3) and appearance of MR-J3-200T servo amplifier have been changed from January 2008
production. Model name of the existing servo amplifier is changed to MR-J3-200T-RT. For MR-J3-200T-RT, refer to appendix 5.
5
5
(Note)
Name/Application
Display
The 3-digit, seven-segment LED shows the servo
status and alarm number.
Baud rate switch (MODE)
MODE
5
Select the CC-Link communication baud rate.
Station number switches (STATION NO.)
Set the station number of the servo amplifier.
X10 S TATION NO. X1
5 5
Set the one place.
Set the ten place.
Occupied station count switch (SW1)
SW1
Set the number of occupied stations.
Switch for manufacturer setting (SW2)
SW2
Do not change the default setting (left).
Main circuit power supply connector (CNP1)
Used to connect the input power supply.
Communication alarm display section
Indicates alarms in CC-Link communication.
L.RUN
SD
RD
L.ERR
USB communication connector (CN5)
Used to connect the personal computer.
RS-422 communication connector (CN3)
Used to connect the MR-PRU03 parameter unit or
personal computer.
CC-Link connector (CN1)
Wire the CC-Link cable.
I/O signal connector (CN6)
Used to connect digital I/O signals.
Encoder connector (CN2)
Used to connect the servo motor encoder.
Battery connector (CN4)
Used to connect the battery for absolute position data
backup.
Control circuit connector (CNP2)
Used to connect the control circuit power supply/
regenerative option.
Servo motor power output connector (CNP3)
Used to connect the servo motor.
Battery holder
Contains the battery for absolute position data backup.
Charge lamp
Lit to indicate that the main circuit is charged. While
this lamp is lit, do not reconnect the cables.
Protective earth (PE) terminal (
Grounding terminal.
Rating plate
1 - 18
Detailed
explanation
Section 5.3
Chapter 11
Section 3.2.4
Section 3.2.3
Section 3.2.5
Section 4.1
Section 4.3
Section 12.1
Section 11.3
Chapter 7
Chapter 7
Chapter 8
Chapter 15
Section 3.2.2
Section 4.2
Section 4.4
Section 4.10
Section 14.1
Section 5.8
Section 14.7
Section 4.1
Section 4.3
Section 12.1
Section 14.2
Section 4.1
Section 4.3
Section 12.1
Section 5.8
) Section 4.1
Section 4.3
Section 12.1
Section 1.4