Mr-Pru03 Parameter Unit Setting - Mitsubishi Electric MELSERVO-J3 Series Instruction Manual

8. PARAMETER UNIT (MR-PRU03)

8.5.2 MR-PRU03 parameter unit setting

MR-PRU03
parameter unit setting
Note. Press the "SHIFT" key and "ESC" key together on any screen to return to the station number setting screen.
Station number (Note)
ESC
Baud rate selection
Contrast adjustment
Buzzer
Software
Version info
8 - 8
Set and enter the station number.
(e.g. To enter 31th axis)
3 1
Press the " " keys to select,
and press the " " key to set.
Press the " " keys to select
from 0 to 63, and press the "
to set.
Press the " 1 " key to select ON or
the " 0 " key to select OFF, and press
the " " key to set.
PRU03 software number is displayed.
" key