8
8.4 Diskette Cable
8.4.1 Removing the Diskette Cable
8-12
4. Connect the fan power cable to the fan.
See Figure 8-7.
Note – If a CD-ROM or tape drive is installed in this system, begin at Step 1.
If the system does not have a CD-ROM or a tape drive, go directly to Step 4.
1. Remove the two drive mounting screws from the chassis.
See Figure 8-11.
Clip
Figure 8-11 Removing the Drive Bracket
Sun Ultra 1 Series Service Manual—November 1995
Screws