Related
Documentation
Replacing the PC Card Adapter Flash Disk
Copyright © 2019, Juniper Networks, Inc.
Plug one end of the replacement Ethernet cable into the
3.
Figure 45 on page
145).
Plug the other end of the cable into the network device.
4.
Figure 47: Routing Engine Ethernet Cable Connector
Figure 48: Routing Engine Interface Ports
Fiber-Optic and Network Cable Specifications for the M7i Router on page 91
M7i Chassis Description on page 11
FIC Specifications for the M7i Router on page 45
Replacing the Console or Auxiliary Cable on page 145
The PC card is an adapter that holds a flash disk. To replace the flash disk (see
Figure 49 on page
147):
If a flash disk is already inserted in the PC card adapter, slide the flash disk out of the
1.
adapter.
Align the replacement flash disk with the adapter.
2.
Press the flash disk firmly all the way into the adapter.
3.
Figure 49: Inserting the PC Card Flash Disk
Chapter 23: Replacing Host Subsystem Components
port (see
MGMT
147