MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
Connecting DC Power Cables to the MX104 Router
54
Figure 16: Connecting AC Power to the Router
MX104 Power Overview on page 18
MX104 AC Power Electrical Safety Guidelines and Warnings on page 141
MX104 AC Power Specifications on page 159
To connect power to the router, you need the following tools:
Phillips (+) screwdriver, number 2
ESD grounding wrist strap
Grounding ring lug with hole sized for an M5 screw
M5 nut and washer (one per DC power supply, attached)
DC power source cables, minimum 14 AWG or as required by local code (not provided)
DC power ring lugs, Panduit PV12-14HDRB-2k (two per DC power supply)
M6 screws and washers (two per DC power supply, attached)
Grounding cable, minimum 14 AWG or as required by local code (not provided)
The DC power supply has one grounding point and two terminals on each power supply,
covered by a clear plastic cover.
WARNING:
You must ground the router before connecting the DC power
cables.
Copyright © 2014, Juniper Networks, Inc.