Opening The Tray Manually - Compaq ProLiant 800 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 5- 2. Opening the CD-ROM tray automatically
3. Close the tray by again pressing the eject button
4. When the busy indicator turns green, the drive is ready to receive
commands and data may be retrieved from the disk.

Opening the Tray Manually

If the tray will not open automatically, you can open it manually by using the
emergency eject button.
The drive performs a diagnostic check and automatically begins
reading the table of contents. The busy indicator turns amber while
the drive reads the table of contents.
The tray automatically opens if the disk is upside-down, not
properly nested in the tray, or if any other condition prevents the
drive from reading the disk.
CAUTION: Before beginning this procedure, turn off the power to
your server.
Writer: Project: Using the CD-ROM Drive Comments:
File Name: G-ch5.doc Last Saved On: 4/24/97 10:31 AM
.
Compaq ProLiant 800 Server Reference Guide
5-3