Ibm Os/2 Device Drivers From Compaq - Compaq ProLiant 800 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-18 Using the System Configuration Utility
IBM OS/2 Device Drivers
from Compaq
Your server must have certain device drivers for some server options to
operate using IBM OS/2 Warp Server 4.0, IBM OS/2 Warp Server SMP 4.0,
OS/2 Warp, OS/2 Warp Connect 3.0, and OS/2 2.x. These drivers are located
on the Compaq SmartStart and Support Software CD you received with your
server. If you use SmartStart to install your operating system, these drivers are
loaded automatically. Otherwise, you can use SmartStart to create an OS/2
Support Software Diskette (SSD) from Compaq to support a manual
installation of OS/2.
For more information on these drivers, run the README.COM file in the root
directory of the OS/2 SSD from Compaq.
Manual installation
If you choose not to let SmartStart configure the server, follow this procedure:
1. Insert the Compaq SmartStart and Support Software CD into the drive.
2. Boot your system.
3. Select Manual Installation.
4. Follow the instructions that display on the monitor.
Writer: Project: Using the System Configuration Utility Comments:
File Name: F-ch4.doc Last Saved On: 4/24/97 9:54 AM