Windows Nt Device Drivers From Compaq - Compaq ProLiant 800 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windows NT Device Drivers
from Compaq
Drivers are supplied to support Windows NT 3.51 and 4.0 on ProLiant servers.
They are located on the Support Software Diskette (NT SSD) for Windows
NT, and some of the drivers are contained on the Windows NT retail product.
These drivers are also located on the Compaq SmartStart CD. The drivers on
the SSD may be newer versions with new functionality, problem fixes, and so
on. If you use SmartStart to install your operating system, these drivers are
installed automatically. Otherwise, you can use SmartStart to create the NT
SSD from Compaq to support a manual installation of NT drivers.
For more information on driver installation, run the README.BAT file in the
root directory of the SSD for Windows NT. This will load the WinHelp file
NTREADME.HLP.
Manual installation
If you choose not to let SmartStart configure the server, follow this procedure:
1. Insert the Compaq SmartStart and Support SoftwareCD into the
CD-ROM drive.
2. Boot your system.
3. Select Manual Installation.
4. Follow the instructions that display on the monitor.
Special Considerations
Please check README files on the SmartStart and Support Software CD or
NT SSD CDs for additional details. For NT 3.51:
1. You must choose custom mode - not express mode
2. During text mode installation, for the adapter driver, you must choose
the IDE CD-ROM (Dual Channel) driver to detect the IDE CD-ROM.
Writer: Project: Using the System Configuration Utility Comments:
File Name: F-ch4.doc Last Saved On: 4/24/97 9:54 AM
Compaq ProLiant 800 Server Reference Guide
4-15