Western Digital Ultrastar Serv60+8 User Manual page 92

User Guide
21. Extend the mid-rails out of the rack so that they are protruding from the front of the rack and the safety
latches engage.
Figure 98: Extend Mid-Rails
22. Install the chassis into the rails.
a)
Caution:
two to lift and one to guide the others whom may have difficulty seeing because the enclosure
is in the way. Ensure that the appropriate measures are taken to safely support the enclosure
during installation. The enclosure MUST have no drives installed and requires a two person
team lift to install. Do not attempt to lift the system if it is fully populated with drives. The
only case in which the system may be installed or removed with the drives populated is if the
facility has a lift that is rated to handle the maximum weight of the fully loaded system.
Warning:
rack OR while installing it into a rack. This can cause serious damage to the unit or serious
This step in the installation requires a minimum of 3 individuals to install safely,
Do not lift the chassis by the Cable Tray while removing the chassis from the
92
4 Part Replacement
4.7 DIMM Replacement