Western Digital Ultrastar Serv60+8 User Manual page 103

User Guide
7. Release the safety latch on the inner rails on each side of the chassis as shown in the following image.
Figure 111: Inner Rail Safety Latch Release
8. Grasp both handles at the front of the enclosure and pull with even pressure to extend the chassis out
of the rack until it is stopped by the safety latches. Make sure that the top cover comes with the chassis
as it is extended out of the rack. The safety latches will prevent the enclosure from coming out of the
rack completely.
9. Remove the chassis from the rack.
a) Be prepared to support the enclosure once it is free of the rails by having a second person or a lift to
support the enclosure
b) Grasp both handles at the front of the enclosure and pull with even pressure until the enclosure will
not extend further.
c) Locate the safety catches on the inner rails attached to the enclosure.
Figure 112: Safety Latch Release
4.8
103
4 Part Replacement
CPU and Heat Sink Module Replacement