Western Digital Ultrastar Serv60+8 User Manual page 186

User Guide
b) Remove all cabling from the add-in card.
Figure 227: Add-In Card Remove Cabling and Uninstall
c) Carefully pull up on the add-in card until it comes free from the connector on the baseboard.
13. Install the add-in cards.
a) Locate the connector for the add-in card being installed.
b) Set the card edge of the add-in card on the connector and firmly press down until the add-in card is
seated.
Figure 228: Add-In Card Install and Connect Cabling
14. Install the add-in card bracket.
186
4 Part Replacement
4.11 Add-in Card Replacement