Western Digital Ultrastar Serv60+8 User Manual page 203

User Guide
a) Open all of the baskets on the CMA.
Figure 252: Open Baskets
b) Remove one cable from the CMA at a time making sure not to put too much strain on the arm.
4. Unlatch all of the connectors that attach the CMA to the enclosure and the rail by locating the latch release
button and pressing it from either side of the latch. There are three total connections that need to be
removed, one at the elbow and two at the opposite end.
Figure 253: Unlatching a CMA Connector
5. Complete the previous step for the second CMA.
Warning:
in order to reduce the weight enough to remove the chassis during the rails replacement process. However,
The following steps regarding uninstalling drives from the enclosure should be followed
203
4 Part Replacement
4.13 Rails Replacement