Western Digital Ultrastar Serv60+8 User Manual page 198

User Guide
a) Open all of the baskets on the CMA.
Figure 245: Open Baskets
b) Remove one cable from the CMA at a time making sure not to put too much strain on the arm.
5. Unlatch all of the connectors that attach the CMA to the enclosure and the rail by locating the latch release
button and pressing it from either side of the latch. There are three total connections that need to be
removed, one at the elbow and two at the opposite end.
Figure 246: Unlatching a CMA Connector
6. Install the CMA.
a) Orient the CMA so that the elbow is on the left hand side.
198
4 Part Replacement
4.12 CMA Replacement