User Guide
b) Remove the server cover panel by carefully pulling on the edge where the screws were removed.
Figure 157: Removing the Server Cover Panel
14. Uninstall the fan bays.
Note: Uninstall the fan bay on both
sides.
a) Remove the screw that secures the fan bay to the chassis.
Figure 158: Removing the Fan Bay Screws
b) Locate the pin that secures the outside of the fan bay to the chassis and pull the pin out and pull up
on the fan bay until the cage is clear of the chassis.
136
4
Part Replacement
4.9
Heat Sink Replacement