Western Digital Ultrastar Serv60+8 User Manual page 259

User Guide
a) Unscrew the three Low-Profile M4 x 3.2mm Philips screws that attach the inner rails to the chassis
using a #2 Philips head screwdriver.
Figure 338: Remove Inner Rail
b) Locate and unlatch the springlock on the side of the inner rail.
Figure 339: Inner Rail Spring Latch
c) Slide the inner rail toward the front of the enclosure to unlock it from the pegs that secure it to the
sidewall and pull it free.
Note: Follow the next step if the cable tray was
installed.
259
4 Part Replacement
4.14 Chassis Replacement