User Guide
c) Align the drive with the empty slot that will receive it. Lower it into the slot, making sure it stays level
and does not snag.
Figure 240: Installing a Drive Assembly
d) Pinch the latch release and carefully press downward to seat the Drive Assembly the rest of the way.
21. Install each drive in the place it was removed from by following the labels or marks that were added
earlier.
22. Cable the CMA.
a) Unlatch the elbow side of the CMA arm and swing it forward by pressing the blue button that says
"push" to unlatch it.
194
4
Part Replacement
4.11
Add-in Card Replacement