Western Digital Ultrastar Serv60+8 User Manual page 206

User Guide
9. Release the safety latch on the inner rails on each side of the chassis as shown in the following image.
Figure 257: Inner Rail Safety Latch Release
10. Push the chassis back into the rack.
11. Locate the M5 x 12mm Philips Pan Head screws on the top cover of the enclosure that keep it in place
when the drawer is extended and unscrew them using a #2 Philips head screwdriver. This will allow the
top cover to move freely with the enclosure when the enclosure is removed.
12. Remove the chassis from the rack.
a) Be prepared to support the enclosure once it is free of the rails by having a second person or a lift to
support the enclosure
b) Grasp both handles at the front of the enclosure and pull with even pressure until the enclosure will
not extend further.
206
4 Part Replacement
4.13 Rails Replacement