Western Digital Ultrastar Serv60+8 User Manual page 235

User Guide
19. Locate the M5 x 12mm Philips Pan Head screws on the top cover of the enclosure that keep it in place
when the drawer is extended and unscrew them using a #2 Philips head screwdriver. This will allow the
top cover to move freely with the enclosure when the enclosure is removed.
20. Grasp both handles at the front of the enclosure and pull with even pressure to extend the chassis out
of the rack until it is stopped by the safety latches. Make sure that the top cover comes with the chassis
as it is extended out of the rack. The safety latches will prevent the enclosure from coming out of the
rack completely.
21. Remove the chassis from the rack.
a) Be prepared to support the enclosure once it is free of the rails by having a second person or a lift to
support the enclosure
b) Grasp both handles at the front of the enclosure and pull with even pressure until the enclosure will
not extend further.
c) Locate the safety catches on the inner rails attached to the enclosure.
Figure 300: Safety Latch Release
d) Depress the latch release lever for the safety latches on the rail and push the chassis very slightly
forward. The chassis is now unsecured from the rack.
235
4 Part Replacement
4.14 Chassis Replacement