Western Digital Ultrastar Serv60+8 User Manual page 73

User Guide
a) Open all of the baskets on the CMA.
Figure 67: Open Baskets
b) Remove one cable from the CMA at a time making sure not to put too much strain on the arm.
2. Unlatch all of the connectors that attach the CMA to the enclosure and the rail by locating the latch release
button and pressing it from either side of the latch. There are three total connections that need to be
removed, one at the elbow and two at the opposite end.
Figure 68: Unlatching a CMA Connector
3. Grasp both handles at the front of the enclosure and pull with even pressure to extend the chassis out
of the rack until it is stopped by the safety latches. The safety latches will prevent the enclosure from
73
4 Part Replacement
4.7 DIMM Replacement