Western Digital Ultrastar Serv60+8 User Manual page 227

User Guide
a) Open all of the baskets on the CMA.
Figure 285: Open Baskets
b) Remove one cable from the CMA at a time making sure not to put too much strain on the arm.
5. Unlatch all of the connectors that attach the CMA to the enclosure and the rail by locating the latch release
button and pressing it from either side of the latch. There are three total connections that need to be
removed, one at the elbow and two at the opposite end.
Figure 286: Unlatching a CMA Connector
6. Uninstall the PSU.
227
4 Part Replacement
4.14 Chassis Replacement