Western Digital Ultrastar Serv60+8 User Manual page 199

User Guide
b) Attach all of the connectors to the brackets on the rails and chassis. There should be one at the elbow
side and two at the other end.
Figure 247: CMA Orientation
c) Slowly slide the enclosure forward to ensure the CMA arm is operating properly, then slide it back into
the rack.
7. Cable the CMA.
a) Unlatch the elbow side of the CMA arm and swing it forward by pressing the blue button that says "push"
to unlatch it.
199
4 Part Replacement
4.12 CMA Replacement