Western Digital Ultrastar Serv60+8 User Manual page 217

User Guide
orient this bracket and mirror it for the other side. Notice the increased distance between the top two
screw holes and the lower screwholes and the flange being oriented on the outside.
Figure 273: Rack Latch Bracket Installed
b) Use 6 of the included M5 x 12mm screws and the T15 Torx screwdriver to install each bracket, 3
screws per bracket.
Caution:
Not having the top cover installed may damage the alignment brackets.
22. Install the chassis into the rails.
a)
Caution:
two to lift and one to guide the others whom may have difficulty seeing because the enclosure
is in the way. Ensure that the appropriate measures are taken to safely support the enclosure
during installation. The enclosure MUST have no drives installed and requires a two person
team lift to install. Do not attempt to lift the system if it is fully populated with drives. The
only case in which the system may be installed or removed with the drives populated is if the
facility has a lift that is rated to handle the maximum weight of the fully loaded system.
Always install the top cover onto the enclosure before installing the chassis into a rack.
This step in the installation requires a minimum of 3 individuals to install safely,
217
4 Part Replacement
4.13 Rails Replacement