Western Digital Ultrastar Serv60+8 User Manual page 236

User Guide
e) Ensure that you have the proper support mechanism to hold the chassis in position, whether that be
a team lifting partner or an appropriate lift.
Warning:
rack OR while installing it into a rack. This can cause serious damage to the unit or serious
bodily harm to those handling the unit. Always team lift the chassis by gripping the underside
of the unit, and never try to lift a chassis that is filled with drives.
f) Slide the chassis forward to free it from the rails. Place the chassis in a safe location to avoid damage.
22. Uninstall server cover panels.
Note: The same steps to uninstall the server cover panel apply to both sides of the enclosure with
the exception of the number of screws that secure the server cover panel. From the rear of the
enclosure, the left panel contains two screws. The panel on the right side of the enclosure contains
one screw.
a) Remove the screws that secure the server cover panels to the chassis using a T7 Torx screwdriver.
Note: When at the rear of the enclosure, the left server cover panel contains two T7 Torx
screws. The left server cover panel contains only one T7 Torx screw.
Figure 301: Removing the Server Cover Panel Screws
Do not lift the chassis by the Cable Tray while removing the chassis from the
236
4 Part Replacement
4.14 Chassis Replacement