Western Digital Ultrastar Serv60+8 User Manual page 54

User Guide
1. Grasp both handles at the front of the enclosure and pull with even pressure to extend the chassis out of
the rack until it is stopped by the safety latches. The safety latches will prevent the enclosure from coming
out of the rack completely and the cover will remain in the rack attached to the rear alignment brackets.
Figure 35: Chassis Handle Operation
2. Locate the faulty IOM by the amber LED that will be lit on top if there is a fault or by activating the identify
LED on the IOM being replaced.
3. Uninstall the IOM.
a) Locate the latch release on the IOM and press it in the direction shown in the following image.
Figure 36: Unlatching the IOM
54
4 Part Replacement
4.2 IOM Replacement