Western Digital Ultrastar Serv60+8 User Manual page 142

User Guide
c) Slide the Heat Sink clear of the socket alignment pins.
19. Remove the CPU from the Heat Sink.
a) Locate the seam that connects the CPU and Heat Sink.
Figure 166: Removing the CPU from the Heat Sink with a Spudger
b) Insert the edge of a plastic spudger in between the CPU and Heat Sink and carefully pry the two
components apart. The plastic spudger may need to be worked around the edges of the entire CPU
and Heat Sink to separate the two parts.
20. Install the Heat Sink onto the CPU.
a) Clean the thermal compound from the top of the CPU using isopropyl alcohol and lint-free wipes.
Ensure that the CPU is residue free and dry before installing the replacement Heat Sink.
142
4 Part Replacement
4.9 Heat Sink Replacement