Western Digital Ultrastar Serv60+8 User Manual page 231

User Guide
a) Locate the latch release on the IOM and press it in the direction shown in the following image.
Figure 291: Unlatching the IOM
b) Grasp both handles, one handle in each hand, and lift evenly with both hands to ensure the IOM
comes out straight. This will prevent any damage to the pins on the internal connectors.
Figure 292: Removing IOM
12. Remove the IOM Blank from IOM slot B.
13. Uninstall the System SSD.
231
4 Part Replacement
4.14 Chassis Replacement