User Guide
42. Install server cover panels.
a) Align and press the server panel cover into place over the server bay.
Note: The Formex material that the panel is made from is flexible and will allow for the panel
to be flexed to fit back into its original placement.
Figure 336: Removing the Server Cover Panel
b) Secure the server cover panel using the original screws and a T7 Torx screwdriver.
Figure 337: Server Cover Panel Screws
43. Install the remaining server cover panel in the same manner as the first.
44. Uninstall the inner rails from the sides of the chassis.
258
4
Part Replacement
4.14
Chassis Replacement