Western Digital Ultrastar Serv60+8 User Manual page 244

User Guide
c) Slide the Heat Sink clear of the socket alignment pins.
30. Uninstall the M.2.
a) Locate the M.2 installed on the baseboard.
b) Remove the Philips head screw that secures the M.2 to the baseboard.
Figure 313: M.2 Screw
c) Pull the top M.2 out of the connector.
Figure 314: Uninstalling the M.2s
d) Repeat the previous substep to remove the bottom M.2.
31. Uninstall the add-in card bracket.
244
4 Part Replacement
4.14 Chassis Replacement