Western Digital Ultrastar Serv60+8 User Manual page 300

User Guide
A message notifying that user has been modified will appear.
Figure 385: User was Modified successfully
Note: If it is preferred to create a completely new administrator, disable root as the Administrator.
Select disable from the User Enable drop-down list and save the new configuration. Create a
new administrator by following the instructions in
User Enable drop-down list value to Administrator.
4. Verify the user modifications appear in the User List. The User Status and Network Privilege changes can
be viewed from the user list.
Figure 386: User added to the User List
5. Verify that the new Administrator credentials work as expected.
a) Log out of the BMC Web GUI by clicking Logout from Actions Menu in the top right-hand corner and
confirming the logout selection.
Creating a New User
300
5 System Management
5.3 HGST BMC Web GUI
on page 304 and set the