Western Digital Ultrastar Serv60+8 User Manual page 166

User Guide
d) Depress the latch release lever for the safety latches on the rail and push the chassis very slightly
forward. The chassis is now unsecured from the rack.
e) Ensure that you have the proper support mechanism to hold the chassis in position, whether that be
a team lifting partner or an appropriate lift.
Warning:
rack OR while installing it into a rack. This can cause serious damage to the unit or serious
bodily harm to those handling the unit. Always team lift the chassis by gripping the underside
of the unit, and never try to lift a chassis that is filled with drives.
f) Slide the chassis forward to free it from the rails. Place the chassis in a safe location to avoid damage.
10.
Attention: Place the enclosure on a flat ESD safe surface and ensure it is stable before continuing
with the procedure.
11. Uninstall server cover panel over the Add-in cards. The server cover panel that needs to be removed is
located (from the rear of the enclosure) on the right side of the enclosure.
a) Remove the screws that secure the server cover panels to the chassis using a T7 Torx screwdriver.
Figure 198: Removing the Server Cover Panel Screws
Do not lift the chassis by the Cable Tray while removing the chassis from the
166
4 Part Replacement
4.10 M.2 Replacement