Western Digital Ultrastar Serv60+8 User Manual page 228

User Guide
a) Grasp the release lever and the metal handle in a downward pinching motion to release the latching
mechanism.
Figure 287: Uninstalling PSU
b) Pull the PSU straight out with even pressure.
7. Grasp both handles at the front of the enclosure and pull with even pressure to extend the chassis out
of the rack until it is stopped by the safety latches. The safety latches will prevent the enclosure from
coming out of the rack completely and the cover will remain in the rack attached to the rear alignment
brackets.
Figure 288: Chassis Handle Operation
8. Remove all of the drives from the chassis before uninstalling the chassis. Be prepared to label the drives
as they are removed so they can be reinstalled in the same location in the new chassis.
9. Follow these steps to remove a Drive Assembly.
a) Find the latch release mechanism on the Drive Assembly being removed.
228
4 Part Replacement
4.14 Chassis Replacement