Tail Lamp Assembly; Replacing The Bulbs In The Tail Lamp Assembly - Skoda Rapid Owner's Manual

Škoda rapid
Hide thumbs Also See for Rapid:
Table of Contents

Advertisement

Tail lamp assembly

Fig. 133 Removing the cover of the lamp/removing the lamp
Fig. 134 Installing the lamp connector/lamp
ä
First read and observe the introductory information and safety warn-
ings
on page 159.
Removing the tail lamp assembly
Open the boot lid.
Insert the clamp for removing the wheel trims
the hole indicated by the arrow
» Fig. 133
Remove the cover in the direction of the arrow.
Use the screwdriver from the tool kit
Grip the tail lamp assembly and carefully remove it by pulling it back at an angle
with loosening movements.
Pull the locking mechanism
» Fig. 134
1
the arrow.
Press the locking mechanism
2
» page
145, Vehicle tool kit into
- .
» Fig. 133
-  to unscrew the lamp.
on the connector in the direction of
» Fig. 134
and remove the connector.
Installing the tail lamp assembly
Insert the connector into the lamp and lock it securely.
Carefully press the tail lamp assembly into the bodywork so that the bolts
» Fig. 135
latch with the mounts in the
2
Screw the tail lamp into place and install the cover. Ensure that the cover en-
gages firmly.

Replacing the bulbs in the tail lamp assembly

Fig. 135 Outer part of the lamp/inner part of the lamp
ä
First read and observe the introductory information and safety warn-
ings
on page 159.
Changing the bulb in the outer part of the lamp
Turn the bulb holder
» Fig. 135
1
ing.
Replace the bulb, insert the holder with the bulb into the lamp housing and
turn in a clockwise direction to the stop.
Changing the bulb in the inner part of the lamp
Unlock the bulb holder using the locking latches
holder from the tail lamp.
Turn the bulb holder anti-clockwise up to the stop and remove it from the lamp
housing
» Fig. 135
- .
Replace the bulb, insert the holder with the bulb into the lamp housing and
turn in a clockwise direction to the stop.
Insert the bulb holder in the tail lamp assembly. All locking mechanisms must
audibly snap into place.
body» Fig. 134
- .
anti-clockwise remove it from the lamp hous-
» Fig. 135
-  and remove the
Fuses and light bulbs
Ð
Ð
163

Advertisement

Table of Contents
loading

Table of Contents