Yamaha TMAX XP530E-A 2017 Service Manual page 97

1. Rear brake lock cable
2. Handlebar cover
3. Throttle cable (decelerator cable)
4. Throttle cable (accelerator cable)
5. Front brake hose (front brake master cylinder
to hydraulic unit)
6. Front brake master cylinder
7. Throttle grip
8. Handlebar switch (right)
9. Handlebar switch (left)
10.Handlebar grip
11.Rear brake master cylinder
12.Rear brake hose (rear brake master cylinder
to hydraulic unit)
13.Brake hose holder
14.Rear brake lock lever
A. Route the rear brake lock cable through the
hole in the handlebar cover.
B. Route through the cable guide in the order of
the throttle cable (decelerator cable) followed
by throttle cable (accelerator cable).
C. Route the handlebar switch lead (right) on
top of and at the back of the handlebar.
D. Route the handlebar switch lead (left) on top
of and at the back of the handlebar.
E. Turn the rear brake lock lever up to the posi-
tion shown in the illustration before installing
the rear brake lock cable.
F. The opening of the clamp should face the
front.
2-50
CABLE ROUTING