EAS32024
CHECKING THE VEHICLE USING THE
YAMAHA DIAGNOSTIC TOOL
Use the Yamaha diagnostic tool and check the
vehicle according to the following procedure.
1. Remove:
• Battery cover
Refer to "GENERAL CHASSIS (1)" on page
4-1.
2. Remove the protective cap "1", and then con-
nect the Yamaha diagnostic tool to the cou-
pler.
Yamaha diagnostic tool USB
90890-03256
Yamaha diagnostic tool (A/I)
90890-03254
1
3. Check:
• Fault codes
TIP
Use the "Diagnosis of malfunction" function of
the Yamaha diagnostic tool to check the fault
codes. For information about using the Yamaha
diagnostic tool, refer to the operation manual
that is included with the tool.
Fault code number is displayed Check and
repair the probable cause of the malfunction.
Refer to "TROUBLESHOOTING DETAILS
(FAULT CODE)" on page 8-63.
4. Perform:
• Dynamic inspection
TIP
Use the "Dynamic inspection" function of the
Yamaha diagnostic tool version 3.0 and after to
perform the dynamic inspection. For information
about using the Yamaha diagnostic tool, refer to
the operation manual that is included with the
tool.
5. Install:
• Battery cover
Refer to "GENERAL CHASSIS (1)" on page
4-1.
PERIODIC MAINTENANCE
EAS30619
CHECKING THE FUEL LINE
The following procedure applies to all of the fuel,
breather and overflow hoses.
1. Remove:
• Bottom side cowling
• Side panel
• Bottom center cowling
Refer to "GENERAL CHASSIS (1)" on page
4-1.
• Center cover
• Fuel tank cover assembly
• Side cover
• Footboard
Refer to "GENERAL CHASSIS (2)" on page
4-11.
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
2. Check:
• Fuel hose "1"
• Fuel tank breather hose "2"
• Fuel tank overflow hose "3"
Cracks/damage Replace.
Loose connection Connect properly.
ECA14940
NOTICE
Make sure the fuel tank breather hose is rout-
ed correctly.
1
2
3-4