Instantaneous Fuel Consumption; Setting Mode; Grip Warmer Settings - Yamaha TMAX XP530E-A 2017 Service Manual

Instantaneous fuel consumption:

The instantaneous fuel consumption display
mode "km/L", "L/100km" or for the UK, "MPG"
shows the fuel consumption under current riding
conditions.
• "km/L" shows the distance that can be traveled
on 1.0 L of fuel.
• "L/100km" shows the amount of fuel necessary
to travel 100 km.
• For the UK: "MPG" shows the distance that can
be traveled on 1.0 Imp.gal of fuel.
TIP
• Instantaneous fuel consumption cannot be re-
set.
• If traveling at speeds under 10 km/h (6 mi/h), "–
–.–" will be displayed.
ECA25730
NOTICE
If there is a malfunction, "– –.–" will be con-
tinuously displayed. Check the vehicle.

Setting mode

1. Setting mode display
TIP
• The vehicle must be stopped to change set-
tings in this mode.
• Starting off or turning the vehicle power off
saves all settings made, then exits the setting
mode.
Push the "MENU" switch for 2 seconds to enter
the setting mode. To exit the setting mode and
return to the normal display, push the "MENU"
switch again for at least 2 seconds.
Display
Grip Warmer
Seat Heater
Traction Control
Maintenance
Display
Brightness
1
All Reset
TIP
• Using the select switch "
display items.
• If grip warmer or seat heater is not equipped,
the "Grip Warmer" or "Seat Heater" items will
not appear.

Grip warmer settings

1. Use the select switch to highlight "Grip
Warmer".
1-16
Description
This function allows you to set
the low, middle, and high set-
tings to 10 temperature levels.
This function allows you to set
the low, middle, and high set-
tings to 10 temperature levels.
This function allows you to
switch the traction control sys-
tem on or off.
This function allows you to
check and reset the "OIL" oil
change interval (distance trav-
eled), "V-Belt" V-Belt change
interval (distance traveled), and
the "FREE" maintenance inter-
vals.
This function allows you to
switch the fuel consumption
units can be switched between
Unit "L/100km" and "km/L".
For the UK: This function does
not indicate on setting mode
display.
This function allows you to
change the items shown in 3
information displays.
This function allows you to
adjust the brightness of the
speedometer, tachometer and
the multi-function display panel
to suit the outside lighting con-
ditions.
This function allows you to set
Clock
the clock.
This function allows you to
reset all items to factory preset
or default setting, except the
odometer, clock, maintenance
counter item "Oil" and mainte-
nance counter item "V-Belt".
FEATURES
/ " to switch the