Fault Code No. P0030 - Yamaha TMAX XP530E-A 2017 Service Manual

Fault code No. P0030

TIP
• If fault code numbers "P0030" and "P0112" are both indicated, take the actions specified for fault code
number "P0112" first.
• If fault code numbers "P0030" and "P0113" are both indicated, take the actions specified for fault code
number "P0113" first.
• If fault code numbers "P0030" and "P0122" are both indicated, take the actions specified for fault code
number "P0122" first.
• If fault code numbers "P0030" and "P0123" are both indicated, take the actions specified for fault code
number "P0123" first.
• If fault code numbers "P0030" and "P0222" are both indicated, take the actions specified for fault code
number "P0222" first.
• If fault code numbers "P0030" and "P0223" are both indicated, take the actions specified for fault code
number "P0223" first.
• If fault code numbers "P0030" and "P2135" are both indicated, take the actions specified for fault code
number "P2135" first.
Fault code No.
Item
Fail-safe system
Diagnostic code No.
Tool display
Procedure
Probable cause of malfunc-
Item
tion and check
1 Connection of O
pler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
P0030
O sensor heater: defective heater controller detected.
2
Able to start engine
Able to drive vehicle
—
—
—
Improperly connected  Con-
sensor cou-
2
nect the coupler securely or
replace the wire harness.
FUEL INJECTION SYSTEM
Maintenance job
8-64
Confirmation of service com-
pletion
Push the ON/start switch, and
then check the condition of the
fault code using the malfunction
mode of the Yamaha diagnostic
tool.
Condition is "Recovered"  Go
to item 6 and finish the service.
Condition is "Detected"  Start
the engine, and then check the
condition of the fault code.
Condition is "Recovered"  Go
to item 6 and finish the service.
Condition is "Detected"  Go to
item 2.
TIP
For this check, also set the
engine stop switch to "ON".